Ph.D (Production Engineering) : National Institute of Technology (NIT), Rourkela
M.Tech (Production Engineering) : National Institute of Technology (NIT), Rourkela
B.Tech (Mechanical Engg.) : GBTU, Lucknow
Research area : Modeling and Optimization of Production Processes, Composite Machining

SCI

  • Optimization of Thrust, Torque, Entry and Exit Delamination Factor during Drilling of CFRP Composite

    Kumar Abhishek, SauravDatta, SibaSankarMahapatra, (2015),Optimization of Thrust, Torque, Entry and Exit Delamination Factor during Drilling of CFRP Composites, The International Journal of Advanced Manufacturing Technology, Vol. 76(1-4), pp. 401-416, Springer.
  • A simulation approach for estimating flank wear and material removal rate in turning of Inconel 718,

    Rajiv Kumar Yadav,Kumar Abhishek, SibaSankarMahapatra, (2015),A simulation approach for estimating flank wear and material removal rate in turning of Inconel 718, Simulation Modelling Practice and Theory, Vol. 52 pp. 1-14, Elsevier.
  • Parametric Appraisal and Optimization in Machining of CFRP Composites by using TLBO (Teaching-Learning Based Optimization Algorithm),

    Kumar Abhishek, V. Rakesh Kumar, Saurav Datta, SibaSankarMahapatra, (2015), Parametric Appraisal and Optimization in Machining of CFRP Composites by using TLBO (Teaching-Learning Based Optimization Algorithm), Journal of Intelligent Manufacturing, Springer DOI 10.1007/s10845-015-1050-8
  • Multi-objective optimization in drilling of CFRP (polyester) composites: Application of a fuzzy embedded harmony search (HS) algorithm,

    Kumar Abhishek, SauravDatta, SibaSankarMahapatra, (2016),Multi-objective optimization in drilling of CFRP (polyester) composites: Application of a fuzzy embedded harmony search (HS) algorithm, Measurement, Vol. 77, pp.222–239.
  • Simulation and optimization of machining parameters in drilling of titanium alloys

    Suman Chatterjee, Siba Sankar Mahapatra, Kumar Abhishek, (2016), Simulation and optimization of machining parameters in drilling of titanium alloys, Simulation Modelling Practice and Theory, Vol. 62 pp. 31-48, Elsevier.
  • Application of JAYA algorithm for the optimization of machining performance characteristics during the turning of CFRP (epoxy) composites: comparison with TLBO, GA, and ICA

    Kumar Abhishek, V. Rakesh Kumar, Saurav Datta, SibaSankarMahapatra, (2015), Application of JAYA algorithm for the optimization of machining performance characteristics during the turning of CFRP (epoxy) composites: comparison with TLBO, GA, and ICA, Engineering with Computers, Springer, DOI 10.1007/s00366-016-0484-8.
  • Machining performance optimization for electro-discharge machining of Inconel 601, 625, 718 and 825: an integrated optimization route combining satisfaction function, fuzzy inference system and Taguchi approach

    Rahul, Kumar Abhishek, Saurav Datta, Siba Sankar Mahapatra, Bibhuti Bhusan Biswal, Machining performance optimization for electro-discharge machining of Inconel 601, 625, 718 and 825: an integrated optimization route combining satisfaction function, fuzzy inference system and Taguchi approach, Journal of the Brazilian Society of Mechanical Sciences and Engineering, Springer, DOI: 10.1007/s40430-016-0659-7,

NON SCI

  • Taguchi Approach Followed by Fuzzy Linguistic Reasoning for Quality-Productivity Optimization in Machining Operation: A Case Study,

    Kumar Abhishek, SauravDatta, SibaSankarMahapatra, Goutam Mandal, GautamMajumdar, (2013),Taguchi Approach Followed by Fuzzy Linguistic Reasoning for Quality-Productivity Optimization in Machining Operation: A Case Study, Journal of Manufacturing Technology and Management, Vol. 24, No. 6, pp. 929-951, Emerald Group Publishing House, UK.
  • Parametric Optimization in Turning of CFRP (Epoxy) Composites: A Case Experimental Research with Exploration of HS Algorithm,

    Kumar Abhishek, SauravDatta, Suman Chatterjee, SibaSankarMahapatra, (2014),Parametric Optimization in Turning of CFRP (Epoxy) Composites: A Case Experimental Research with Exploration of HS Algorithm, Applied Mechanics and Materials, Trans Tech Publication, Switzerland,Vol. 619, pp. 54-57.
  • Multi-Objective Optimization in Drilling of GFRP Composites: A Degree of Similarity Approach,

    VikasSonkar, Kumar Abhishek, SauravDatta, SibaSankarMahapatra, (2014), Multi-Objective Optimization in Drilling of GFRP Composites: A Degree of Similarity Approach, Procedia Materials Science, Vol. 6, pp. 538-543.
  • Comparing Predictability of Genetic Programming and ANFIS on Drilling Performance Modeling for GFRP Composites

    Kumar Abhishek, Biranchi Narayan Panda, SauravDatta, SibaSankarMahapatra, (2014), Comparing Predictability of Genetic Programming and ANFIS on Drilling Performance Modeling for GFRP Composites, Procedia Materials Science, Vol. 6, pp. 544-550.
  • Optimization of Drilling Process Parameters by Harmony Search Algorithm

    Suman Chatterjee, Kumar Abhishek, Rajiv Kumar Yadav,SibaSankarMahapatra, (2014),Optimization of Drilling Process Parameters by Harmony Search Algorithm, IEEE Proceeding, pp. 1-5
  • NSGA-II Approach of Optimization to Study the Effects of Drilling Parameters in AISI-304 Stainless Steel

    Suman Chatterjee, Kumar Abhishek, SibaSankarMahapatra, SauravDatta, Rajiv Kumar Yadav,NSGA-II Approach of Optimization to Study the Effects of Drilling Parameters in AISI-304 Stainless Steel, Procedia Engineering, Vol. 97, pp. 78-84.
  • Application of NSGA II for Optimization of Multi-performance Characteristics During Machining of GFRP (epoxy) Composites

    Kumar Abhishek, SauravDatta, Suman Chatterjee, SibaSankarMahapatra, (2015)Application of NSGA II for Optimization of Multi-performance Characteristics During Machining of GFRP (epoxy) Composites, Materials Today: Proceedings, Vol. 2 (4), pp. 2353-2358.
  • Optimization of Multi-performance Characteristics During Drilling of GFRP (Epoxy) Composites by Harmony Search Algorithm,

    Kumar Abhishek, SauravDatta, SibaSankarMahapatra,(2015)Optimization of Multi-performance Characteristics During Drilling of GFRP (Epoxy) Composites by Harmony Search Algorithm, Materials Today: Proceedings, Vol. 2 (4), pp. 2332-2336
  • Fuzzy Rule Based Optimization in Machining of FRP Polyester Composites

    Rajesh Kumar Verma, Kumar Abhishek, SauravDatta, SibaSankarMahapatra, (2011), Fuzzy Rule Based Optimization in Machining of FRP Polyester Composites, Turkish Journal of Fuzzy Systems, An Official Journal of Turkish Fuzzy Systems Association. Vol.2, No.2, pp. 99-121.
  • Multi-Response Optimization in Drilling of Composites: Introduction of a Similarity Based Approach in Combination with Taguchi’s Philosophy

    Kumar Abhishek, SauravDatta, SibaSankarMahapatra (2014), Multi-Response Optimization in Drilling of Composites: Introduction of a Similarity Based Approach in Combination with Taguchi’s Philosophy, Journal for Manufacturing Science and Production, Vol. 14, No. 3, pp. 151-170.

Memberships

  • International Association of Engineers (IAENG)

    Life Time member